WS2811 15mm width Digital LED Strip Dc 12V 60leds 20 pixels per meter -30meter long per strip -no voltage drop issue

3ozws2811pixelledstrip

Products Inquiry

Name * :

Tel * :

Email :

CompanyName :

Message :

Product Details

New item: WS2811 15mm width Digital LED Strip Dc 12V 60leds 20 pixels per meter 30meter long per strip -no voltage drop issue

Introduction

Led type: 5050 SMD RGB LED

Brightness: 2100MCD for one 5050 RGB led
IC type: ws2811
PCB Width:15mm

Coppper material: 3ounce 3535 um copper

Led lighting angle: 120°
LED Q'ty: 60leds/m
IP Rating IP20, IP65, IP67, IP68.

IP20 Non-waterproof with 3M sticker on the back,
IP65 waterproof is silicone gel or epoxy on the surface,
IP67: silicone tube,(silicone sheathing ),
IP68: silcone gel(or epoxy) inside silicone tube.

Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
3 LED 1 IC with 12V ,every 3 led individual controlled, can be made into high-density high-definition display;

Advantages:

1.PWM refresh rate: 1.2kHz, transfer speed 800k bps

2. It comes in 1 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3.12V ( 3leds one IC with 12V)

4. 3unce PCB board with double cooper layer(hongqi brand 3535 copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . ever 3 LEDcan be cut with 12V,

7. 60 leds per meter . 12V low voltage inputted , don’t over 13V , otherwise you will destroy the entire strip .

30leds per meter optional

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky