Dc24V Full color addressable 10mm width 1934 Pixel RGB 2835 LED Strip 20pixels/m 120leds/m

24v 1934 2835 pixel led strip

Products Inquiry

Name * :

Tel * :

Email :

CompanyName :

Message :

Product Details

Dc24V Full color addressable 10mm width 1934A Pixel RGB 2835 LED Strip 20pixels/m 120leds/m

2835 1934 rgb led strip.jpg

Advantages:

1)Brihtness >2100mcd 2835 RGB led lamp with copper bracket and gold wire
2) 2OZ pure copper PCB board with 8mm width -10meter long no voltage drop
3)Double membrance covering the FPCB board ,good protection,
4) Standard SPI protcel: 1934Ic chipset -dual signal .
5)cutting unit:every 6led (50mm),
7) Dc24V 14.4.W/meter (max),
8) LED density: 96pcs RGB 2835 LED per meter ,
9) controller system: artnet or offline or online led controller

Describe:

- Control IC included, supporting numerous Color-change effects;
- Pcontrol by SD controller,Arduino,DMX512,Artnet;
- Flexible PCB 24V low voltage input;
- 96pcs RGB smd 2835 leds and 20 Pixels per meter;
- Absolutely addressable ,each IC control 18 leds
- 5M per roll,also Customer’s length available;

-1934A support 3channels, support 2835RGB led

-there is four line , Date1 and data2 and GND and DC24V+

Specification

Item	RL-STR-1934-2835RGB-20P-120-24V
LED Quantity	96leds/m 120led per meter optional
PCB thickness	10mm width,2 ounce copper( 35um thinkness)
PCB Color	White PCB ,Black PCB
IC type	LB1934A (SPI protocel ,same work as ws2811,ws2815)
cutting unit	62.5mm
IP Rating	IP20/IP65/IP67/Ip68
Connector	4PIN JST-SM connector
Control Model	SPI control
Controller	T1000s/K1000c/H807SA/Arduino/Glediator/DMX/Artnet/Raspberry
Product Keywords	1934A pixel led stirp ,2835 RGB led strip

Advantages

1. This is 24V pixel led strip , very narrow and suit for neon flex led tube .

2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3.24V working voltage ( 6leds with one IC with 24V)

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . every 6 LEDcan be cut with 24V,

7. 96leds per meter . 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm GW: 12.5kg with nonwaterproof Ip20

Waterproof Rate:

IP20 Non-waterproof with 3M sticker on the back
IP65 waterproof is silicone gel on the surface
IP67: silicone tube/coating
IP68: silcone gel(or epoxy) inside silicone tube.

Connection guide

SPI signal: LED Strip+LED power supply +LED controller

DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder

LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino.

(offline / PC online)

LED power suppply: power supply, T- series, A- series power supply...(waterproof / non-waterproof)

Real Picture

120led per meter optional!(with 3 wire , IC chipset ws2811 ,ucs1903)

application