Dc24V 60Led 20pixels 3oz thickness WS2811 UCS 1903 SM16703 RGB Digital LED Strip

Dc24V 60Led  20pixels  3oz thickness WS2811 UCS 1903 SM16703  RGB Digital LED Strip-20meter long no voltage drop issue 

Introduction

Led type: 5050 SMD RGB LED
IC type: UCS1903/ws2811/SM16703
PCB Width:10mm
Led lighting angle: 120°
LED Q'ty:  60led/m.
IP Rating IP20, IP65, IP67, IP68.

• IP20 Non-waterproof with 3M sticker on the back,

• IP65 waterproof is silicone gel or epoxy on the surface,

• IP67: silicone tube,(silicone sheathing ),

• IP68: silcone gel(or epoxy) inside silicone tube.

Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
3 LED 1 IC, individual controlled, can be made into high-density high-definition display;

Advantages:

1.PWM refresh rate: 1.2kHz, transfer speed 800k bps

2. It comes in 1 meters per reel with 3Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3.working voltage DC24V  ( 3leds one IC with 24V, )

4.3unce PCB board with double cooper layer(hongqi brand 35um70um copper )--20meter long no voltage drop issue .

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . ever 3 LEDcan be cut with 24V, 

7. 60 leds per  meter . 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .

30leds per meter optional

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

Product details

Nonwaterproof Ip20

white color  optional

waterproof Ip68

Ip65

Ip20 with nonwaterproof 

IP67 with silicone tube 

Take noted of the sm16703p (same work ws2811)  it lights up white when power on , ( no signal input)

with ws2811 --all light power off (no signal input)

Connection chart