Welcome to Rose lighting
CALL TO SCHEDULE YOUR FREE!
18675649004
info@rose-lighting.com
info@rose-lighting.com
Toggle Navigation
Dc24V Full color addressable 8mm width 1934A Pixel RGB 2835 LED Strip 16pixels/m 96leds/m
Advantages:
1)Brihtness >2100mcd 2835 RGB led lamp with copper bracket and gold wire
2) 2OZ pure copper PCB board with 8mm width -10meter long no voltage drop
3)Double membrance covering the FPCB board ,good protection,
4) Standard SPI protcel: 1934Ic chipset -dual signal .
5)cutting unit:every 6led (50mm),
7) Dc24V 14.4.W/meter (max),
8) LED density: 96pcs RGB 2835 LED per meter ,
9) controller system: artnet or offline or online led controller
Describe:
- Control IC included, supporting numerous Color-change effects;
- Pcontrol by SD controller,Arduino,DMX512,Artnet;
- Flexible PCB 24V low voltage input;
- 96pcs RGB smd 2835 leds and 20 Pixels per meter;
- Absolutely addressable ,each IC control 18 leds
- 5M per roll,also Customer’s length available;
-1934A support 3channels, support 2835RGB led
-there is four line , Date1 and data2 and GND and DC24V+
Specification
| Item | RL-STR-1934-2835RGB-16P-96-24V |
| LED Quantity | 96leds/m 120led per meter optional |
| PCB thickness | 8mm width,2 ounce copper( 35um thinkness) |
| PCB Color | White PCB ,Black PCB |
| IC type | LB1934A (SPI protocel ,same work as ws2811,ws2815) |
| cutting unit | 62.5mm |
| IP Rating | IP20/IP65/IP67/Ip68 |
| Connector | 4PIN JST-SM connector |
| Control Model | SPI control |
| Controller | T1000s/K1000c/H807SA/Arduino/Glediator/DMX/Artnet/Raspberry |
| Product Keywords | 1934A pixel led stirp ,2835 RGB led strip |
1. This is 24V pixel led strip , very narrow and suit for neon flex led tube .
2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .
3.24V working voltage ( 6leds with one IC with 24V)
4.2unce PCB board with double cooper layer(hongqi brand 35um copper )
5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board
6. Flexible PCB material . every 6 LEDcan be cut with 24V,
7. 96leds per meter . 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .
8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)
9. Installing : screw+silicon clipand 3M adhesive on back side for sticky
10.Packaging
5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm GW: 12.5kg with nonwaterproof Ip20
Waterproof Rate:
IP20 Non-waterproof with 3M sticker on the back
IP65 waterproof is silicone gel on the surface
IP67: silicone tube/coating
IP68: silcone gel(or epoxy) inside silicone tube.
Connection guide
SPI signal: LED Strip+LED power supply +LED controller
DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder
LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino.
(offline / PC online)
LED power suppply: power supply, T- series, A- series power supply...(waterproof / non-waterproof)
Real Picture
There is other 96led pixel led strip optional!
120led per meter optional!
application
