​ DC24V 20pixels 60leds 20meter long no voltage drop 1934Ic Digital Pixel LED Strips with dual signal

DC24V 20pixels  60leds  20meter long no voltage drop 1934Ic  Digital Pixel LED Strips with dual signal

below is the sample test of 2oz thickness pcb of 10meter 1934 led strip-10meter long -no voltage drop issue 

need to make 4oz thickness pcb with 12mm width --then can make 20meter long -no voltage drop issue.

Below is our 24V 20 pixels 60led 1934 pixel rgb led strip with dual signal -with buck circuit -20meter long no voltage drop issue with one power input .

(we can make your logo -welcome OEM and ODM)

1934 LED strip wiring 

Describe:

• Digital  DC24V  LED Strip

• Item: RL-STR-1934-5050RGB--20p-60-24V-10mm

• IC Type:1934(TM1934 IC chipset--same work as ws2812 ws2811) TTL protocel 

• Color:Digital RGB

• LED Quantity: 60 leds per meter 

• Size: 5000*10*2.5(mm)

• View angle:120°

• Working Input Voltage:  Dc24v 

• Drive Mode:Constant Voltage

• Pixels/M :20pixels with 24V(3led per pixel )

• Pcb quality :2oz thickness ( 10meter long-no voltage drop issue )

• Pcb quality :4oz thickness ( 20meter long-no voltage drop issue )

Advantages

1.PWM refresh rate: 800kHz, transfer speed 800k bps

2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3. Pure copper bracket and pure gold wire for 5050 RGB led chip

4.2unce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. 60leds and 20pixels per meter  with 24V ,One IC control 3 leds ,

7. 24V low voltage inputted , don’t over 25V , otherwise you will destroy the entire strip .

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10: dual signal ,one pixel no work ,no affect next one work.

11:Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

waterproof Type

IP20 :Non-waterproof with 3M sticker on the back, Size:5000*10*1.5mm

IP65: waterproof is silicone gel on the surface,Size:5000*10*1.5mm

IP67: silicone tube,Size:5000*12*3mm

IP68: silcone gel inside silicone tube.Size:5000*12*3mm

Product details

12V with 3led per pixel optional 

24V 6led 1 pixel 1934A pixel led strip optional also