fastest addressable 8bit 60led HD107s pixel led stripHD107s (a replacement of APA102/APA102/SK9822)

fastest addressable 8bit 60led  HD107s pixel led stripHD107s  (a replacement of APA102/APA102/SK9822)

specification

Led type: hd107s  5050  SMD RGB LED
IC type: hd107s
PCB Width:10mm/12mm 
Led lighting angle: 120°
LED Q’ty: 30leds/m, 60led/sm, 72leds/m, 96leds/m, 144leds,
IP Rating IP20, IP65, IP67, IP68.
Single-flow, gradient, chase, scan and other full-color effects;
Splicing to achieve text movement and video animation and other dynamic effects;
Can be bend and cut, can achieve a certain curvature and length of the modeling screen;
1 LED 1 IC, individual controlled, can be made into high-density high-definition display;

Advantages

1.hd107s led  has PWM refresh rate: >26kHz, Oscillator frequency: >20Mhz(a sk9822 with 4.7kHZ and 2M Hz transmission speed )

2. It comes in 1 meters per reel with 4Pin female/male JST SM connector on both end and separated Power / Ground Wires . Customized length is workable .

3.Dc5V  constant voltage driving ,

4.2unce/4ounce PCB board with double cooper layer(hongqi brand 35um copper )

5.doublesides membrane cover the pcb board. make sure the copper no drop from the pcb board

6. Flexible PCB material . ever led can be cut,

7. 30/60/144M . 5V low voltage inputted , don’t over 6V , otherwise you will destroy the entire strip .

8. Controller System：SD controller , DMX controller , Artnet and so on .(SPI protocel)

9. Installing : screw+silicon clipand 3M adhesive on back side for sticky

10.Packaging

5m/roll 60rolls/ carton carton size: 48cm*48cm*28cm  GW: 12.5kg with nonwaterproof Ip20

Waterproof Rate:

• IP20: Non-waterproof with 3M sticker on the back

• IP65: waterproof is silicone gel or epoxy on the surfacewith 3M sticker on the back

• I67: silicone tube

• IP68: silcone gel(or epoxy) inside silicone tube.

Picture

Other led quantity optional!

72led

30led

wiring chart

Differences between HD107s compatible led 

HD107s pixel led chip with PWM refresh Rate 27KHZ and transmission rate 30MHZ
original apa102 pixel led chip with PWM refresh rate 20KHZ and transmission rate 20MHZ (Gone)

sk9822A  pixel led chip with PWM refresh rate 27KHZ and transmission rate 30MHZ (fake apa102)
sk9822 pixel led chip with PWM refresh rate 4.7KHZ and transmission rate 2MHZ (fake apa102)

The comparison chart is as follows:

Look for details about HD107s VS apa102 102 or sk9822 or HD108 here please

https://www.rose-lighting.com/the-difference-between-sk9822a-and-apa102-hd107s-hd108-led/

download the detailed specfication about the HD107s 5050 RGB pixel led chip here please

https://www.rose-lighting.com/wp-content/uploads/sites/53/2020/05/HD107S-5050-Specificaion-V1.0.1.pdf

download the detailed specfication about the  sk9822A 5050 RGB pixel led chip here please

SK9822-A REV.01 EN-5050-RGB-27K HZ PWM-30M bps speed

download the detailed specfication about the  sk9822  5050 RGB pixel led chip here please

SK9822 REV.07 EN-5050-RGB-4.6K PWM refresh rate

download the detailed specfication about the  HD108  5050 RGB pixel led chip here please

HD108-5050-LED-Specificaion-V1.1.0-Rose-Lighting

download the detailed specfication about the  apa102 5050 RGB pixel led chip here please